Browse all practice questions for the Collin College Fire Academy Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Collin College Fire Academy Practice Test 2026 – Complete Exam Prep course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Which factor is NOT typically considered when evaluating compartment fire behavior?
  • Which type of jack can be dangerous because of their instability?
  • What is vertical ventilation used for?
  • Which drag technique is not considered fast or effective for dragging a victim to safety?
  • If friction loss is not accounted for in hose layout, what is a likely outcome at the nozzle?
  • Which mechanisms move smoke and heat through a structure?
  • Which NFPA standard identifies chemical hazards of materials at fixed facilities?
  • Describe the basic procedure to secure water from a hydrant.
  • Fire fighters must exit the IDLH (immediately dangerous to life and health) before _____________.
  • Petroleum based fuels are?
  • Decontamination takes place in which zone of the hazmat incident?
  • At a hazardous materials emergency, the Operations section serves the task of
  • Gas generators should be tested for how many minutes?
  • Multi gas monitors can detect?
  • To make immediate rescues of victims in a hazmat incident, the firefighter can use which gear?
  • Which description best defines horizontal ventilation?
  • An intermodal tank boxed in a frame for transport is typically used for shipments of which cargo type?
  • Fog nozzles are not recommended for use with protein and fluoroprotein foam.
  • CHEMTREC provides information for chemical emergencies; what is its full name?
  • Fire hazards that arise from processes or operations that are related to a specific occupancy is a __________ hazard?
  • In forcible entry tools, which is described as a tool to grab for entry?
  • A sketch depicting the general arrangement of a property in reference to streets, adjacent properties, and other important features is a _________ .
  • Which concentration range describes Class A foam use for firefighting?
  • When working with ladders under power lines, a minimum of how many feet must be kept to ensure firefighter safety?
  • Which type of hose testing is performed by the fire department to verify service readiness?
  • The map symbol for a fire hydrant is what shape?
  • When determining evacuation distances to avoid airborne contamination, the incident commander should what?
  • What is the purpose of using a Special In-Line Gate Valve during hose service testing?
  • During a vehicle fire overhaul, you should _______.
  • Which statement best describes the role of a standpipe system on a fireground?
  • List three signs that indicate an unsafe scene for firefighters.
  • Remote shutoffs in fixed facilities are typically located near the back door.
  • Which item is not typically part of the PPE for interior structural entry?
  • Which of the following is NOT a typical use of a thermal imaging camera on the fire scene?
  • Why is pre-incident planning important for fire suppression?
  • Hidden fires in mattresses and stuffed furniture are best addressed by which action?
  • In oxygen enriched environments, you should not enter until the concentration is less than what percentage?
  • A flashover makes a room or fire compartment a which kind of condition?
  • What does START stand for in mass casualty triage?
  • Which statement about OSHA is true?
  • Which of the following statements about foam application is NOT true?
  • A reaction associated with over-pressurization of closed containers that occurs at a rate of 1 second or less is a __________.
  • What tool is appropriate to remove a windshield?
  • The electrically operated detection device that uses a bi-metallic strip is called what?
  • Which statement is NOT part of the fire triangle?
  • Pipeline/vent markers are required to state
  • Which construction type is typically fire-resistive and has the highest fire resistance ratings?
  • What is the term for switching from a duplex to a simplex radio channel?
  • What is horizontal ventilation?
  • During initial size-up of a structure fire, which factors should be considered?
  • What is the main difference between Type I and Type II construction?
  • A sketch that shows property layout with respect to streets and nearby features is called what?
  • In wild land fire fighting, ____________ is a goody way to protect against exposures.
  • If arson is suspected after a vehicle fire, who should be contacted?
  • In an emergency at a facility with bulk chemical storage, where the SDS (safety data sheet) is not available on site, you may obtain information from the ________________ .
  • Which tanker classification is described as carrying flammable liquids, class B poisons, and liquid food products with 4 psi vapor pressure?
  • How do smoothbore and fog nozzles differ in use?
  • Fire fighters operating within how many feet of the water’s edge must wear a life vest?
  • Salvage operations include boarding up openings. True or False?
  • Which of the following is true about identifying materials by placard numbers?
  • What is the primary objective of overhaul after extinguishment?
  • In the extremity carry, how do two firefighters position themselves?
  • When using air purifying respirators, which operational component must be considered prior to use?
  • In regards to technical decontamination, the level of personal protective equipment should be ______.
  • If 40 feet of a 50 foot extension ladder is used, how far away should the butt of the ladder be placed from the building?
  • What is the primary benefit of using a thermal imaging camera during an interior search?
  • A tanker designed to carry flammable liquids, class B poisons, and liquid food products with a vapor pressure of 4 psi is a
  • What is friction loss and why is it important to calculate?
  • What is the purpose of a standpipe system on a fire scene?
  • Which type of collapse happens when one side of a floor or ceiling collapses next to a load-bearing wall?
  • What is the purpose of salvage operations in a fire incident?
  • Which tool is commonly used for forcible entry through doors or walls?
  • A concentration threshold used before entry into oxygen-enriched environments is 23.5%. Which option expresses this threshold?
  • In fire emergencies, what does the acronym RACE stand for?
  • Which safety feature is commonly integrated with SCBA to help locate a firefighter in distress?
  • In fire departments that have access to multiple radio channels, fire ground Ops should be
  • Which statement correctly identifies when hose service pressure testing is required?
  • Name two safety features commonly found on SCBA.
  • What is the approximate millimeter equivalent of a 1 3/4 inch handline?
  • Which type of collapse floor pattern occurs when both sides of the floor or ceiling collapse around a load-bearing wall?
  • Which type of collapse happens when the center of a floor or ceiling collapses between two load-bearing walls?
  • In a cross zoned smoke detection system, what must occur before the alarm sounds?
  • During hydrant operation, which action should be performed first?
  • Why is air management important when using an SCBA?
  • Remote shutoffs are usually marked with a placard of which color?
  • What is the typical size of an initial interior attack handline?
  • Which hazard classification is described as arising from processes or operations related to a particular occupancy?
  • The Balloon Toss requires how many firefighters?
  • Which construction type is most susceptible to rapid collapse due to lightweight components?
  • What is the purpose of the Incident Command System (ICS) on a fire scene?
  • Boarding up openings made by forcible entry is a salvage or overhaul activity?
  • On vehicles, the two most common locations for remote shutoffs are at the rear of the cargo tank or behind the driver's door.
  • The purpose of a repeater is to?
  • In a clothes drag, whose arms provide head support?
  • What are the three elements of the fire triangle?
  • Which component is included in the LUNAR acronym for firefighter mayday communications?
  • Which building construction type provides the highest fire resistance ratings?
  • During a rescue operation, maintaining a handline primarily supports which safety outcome?
  • According to the ERG, a large spill is defined as how many gallons or greater?
  • Class A Foams are effective at what concentration range?
  • Which ICS section is responsible for providing resources and support?
  • What type of collapse happens when multiple floors of ceilings collapse leaving one load bearing wall to handle the weight?
  • Which feature best describes the donut roll technique?
  • A PAR should be called for which of the following reasons?
  • What is the purpose of the buddy system in firefighting?
  • Which document would you consult to identify a chemical's hazards and first aid measures?
  • In the context of containment, which element may require containment during vapor dispersion?
  • Colorimetric tubes are __________.
  • What is the main goal of fire prevention codes?
  • In rescue operations, what is the primary purpose of maintaining a handline?
  • What are the two main ventilation types used in firefighting?
  • When is it common/necessary for an incident commander to call for a PAR?
  • Type A packaging is used for shipping which kind of materials in drums?
  • During a two firefighter raise of a single ladder, which firefighter is responsible for determining proper placement and position of the ladder?
  • Which description best defines vertical ventilation?
  • LEL meters will alarm off at ______ percent of the LEL.
  • Which statement best describes backdraft?
  • What does GPM stand for and why is it important?
  • Explain the two-in/two-out rule in interior firefighting operations.
  • NFPA 704 is the standard used to identify hazards on which type of installations?
  • permeation is happening at the __________.
  • In a two-firefighter ladder raise, placement and position of the ladder are determined by which firefighter?
  • Hidden fires in mattresses and stuffed furnishings are best addressed by which action?
  • What is the purpose of exposure protection in a structure fire?
  • Compartment fire behavior is influenced by which factors?
  • Level C ensemble is the minimum protection for which type of hazard?
  • Alcohol-resistant foam is used for polar solvents. Which option best completes this statement?
  • Permeation occurs at what level?
  • When using the clothes drag, the ______ support the victims head.
  • What is the primary goal of salvage operations during a fire?
  • In kernmantle rope, the majority of strength comes from which part?
  • During product control, the foam used for polar solvents is
  • The fuels derived from petroleum belong to which chemical family?
  • Which foam application technique requires the stream to be broken to prevent splashing?
  • Which role is a command staff position in the Incident Management System?
  • Which statement best describes ladder safety practice?
  • Which statement best describes vertical ventilation?
  • For forcible entry, which cutting tool would you grab?
  • The IM102 intermodal tank typically carries which type of products?
  • A direct attack on a wild land fire is initiated ______________.
  • What is the maximum length of time a fire hose may be used in service without a service pressure test?
  • The rope-guided search method is most appropriate for which setting?
  • What is the main advantage of the donut roll in rescue operations?
  • To prevent injury should a hose fail during service testing, a Special In-Line Gate Valve should be used.
  • On standard hazard maps, the hydrant is depicted by which symbol?
  • A device that indicates gas presence without identifying the gas type is called a?
  • Overhaul begins when fire investigation concerns are addressed. True or False?
  • When filling a hose line to test, a pump pressure of ______ psi is maintained.
  • Although there is no definitive temperature range for flashover, ____________ is widely accepted as temperatures for flashover conditions.
  • Which objective is achieved by overhaul after a fire is extinguished?
  • Which tool is used to pull ceilings and walls to detect hidden fire and create a safer path?
  • Emergency decontamination is required ____________ .
  • What is the most commonly used decon method?
  • BLEVE stands for which phrase?
  • One type of hazardous material that may be shock sensitive is which substance?
  • What is the purpose of a pike pole in firefighting operations?
  • Do air-aspirating foam nozzles or foam nozzle adaptors on standard fog nozzles produce effective, high-quality foam?
  • When removing an unconscious adult patient down a ladder, you should ______________ .
  • Immediate rescues in hazmat incidents are performed using which type of gear?
  • The standard to don a SCBA is a requirement of which NFPA standard?
  • To capitalize, what must the department safety program be?
  • What is the function of a PASS device?
  • An intermodal tank boxed in frame for transport rated 100–500 psi is classified for which cargo type?
  • Which temperature range is widely accepted as flashover conditions?
  • Co2 extinguishers are generally rated for which type(s) of fires?
  • The primary focus of the Operations section in a hazardous materials incident is
  • In planning to avoid airborne contamination, which device should be used by the incident commander?
  • What is the role of a Rapid Intervention Crew (RIC)?
  • Which statement best describes the use of a smoothbore nozzle?
  • What is a typical sequence for donning PPE before entry?
  • During trench rescue operations, cordon off approximately how many feet around the trench?
  • How high up do fuels have to be in order to be considered aerial fuels in regards to wild land firefighting?
  • What best describes the purpose of overhaul?
  • What is the primary function of PPE during fire suppression?
  • What is the standard sequence of a Primary Survey in patient assessment?
  • Not following the two-in/two-out rule can increase the risk of what?
  • The document that lists a material's composition, hazard type, and first aid measures is called what?
  • Can Aqueous Film Forming Foam be effectively applied through a standard fog nozzle?
  • The type of listening used by a telecommunication personnel to obtain all of the necessary information for a incident is ____________ listening.
  • What is the role of a thermal imaging camera on the fire scene?
  • What PPE is required for interior structural entry?
  • The shipping of radioactive materials in a drum is considered which packaging type?
  • A branch in the IMS is responsible for which activity?
  • Intermodal tank IM102 is designed to transport which type of materials?
  • The core of a kernmantle rope makes up what percentage of its strength?
  • To avoid sharp kinks or bends in the hose line when advancing up a stairwell, you should _______.
  • What does the color red signify in triage tagging?
  • pipeline markings are required at ____________.
  • Liquids that have a flashpoint less than 100 degrees Fahrenheit are _____________.
  • Name two ladder types typically used by firefighters.
  • Which statement about sheltering in place is true?
  • Which statement describes the purpose of activating a Rapid Intervention Crew?
  • During overhaul, what safety step helps prevent vehicle movement?
  • What is the recommended minimum pressure of a fire hydrant?
  • An MC307/407 carries chemicals with a pressure not to exceed which range?
  • Which statement best describes OSHA's general regulatory scope as reflected in common practice?
  • The minimum distance to park a fire apparatus from a vehicle fire is _____________.
  • Colorimetric tubes are best described as which of the following?
  • Which statement about horizontal ventilation is true?
  • What is a master stream and when is it typically used?
  • Toxic Gases are classified by what number identification/placard number?
  • What is the most appropriate search method for warehouse or large spaces?
  • When advancing a hose line into a structure, what is a key objective?
  • The rope technique shown is called a Round Turn. Which option best matches this term?
  • What is the difference between a primary search and a secondary search?
  • When dealing with vapor dispersion, the ________ may need to be contained.
  • Evaluating the effectiveness of decontamination of tools is completed using what?
  • In dealing with biological hazards, what is the minimum required PPE ensemble level?
  • The type of hose testing conducted by a fire department is _________ .
  • Which device operates with a bi-metallic strip and detects heat?
  • Which item is generally the first to be donned in the PPE sequence before interior entry?
  • On arrival, what is the primary purpose of size-up?
  • What does LUNAR stand for in firefighter mayday communications?
  • Which color tag represents the highest priority for treatment in triage tagging?
  • Within the IMS (Incident Management System), the Liaison, Safety, and Public Information Officers are ___________.
  • Which statement is a recognized indicator of potential backdraft?
  • Why is ladder safety tethering important?
  • Define flashover.
  • In departments with multiple radio channels, what is the purpose of designating a separate channel for fire ground operations?
  • In the UN labeling system, which class number corresponds to oxidizing substances?
  • The EPA signal word "caution" indicates which level of danger or toxicity?
Subscribe

Get the latest from Examzify

You can unsubscribe at any time. Read our privacy policy